.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are three piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately, re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability, and performance.
To address these needs, Wilwood has tooled three separate castings that are fitted with 2.75", 2.50" or 2.00" stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when used in hard braking applications and maintain their resilience to provide positive piston retraction on release.
Features:
- Caliper Type: 1 Piston
- 2.00" Piston, 1.00" Disc
- Rotor Diameter: 11.75"
- Stainless Piston Type
- Pad Area: 8.7"
- Anodized
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Willwood Engineering Inc. was formed back in 1977 by Bill Wood. The company is known for manufacturing a high-performance disc brake system.
Throughout the years, the company has continuously improved itself, along with the ever-changing advancement in-vehicle technology.
Today, the company had extended its wheel designs to supply brake components for various vehicles, including agricultural equipment, utility vehicles, motorcycles, four-wheelers, military vehicles, and even snowmobiles.
A Brake for Every NeedWilwood has an extensive inventory of brakes parts for various vehicles. With over hundreds of brake calipers, master cylinder, and rotor designs, not to mention the tons of brackets, fitting, brake lines, and valves, it has the right kit for every vehicle application you can think of.
Engineered to PerfectionThe company entails the most advanced technology and software in designing and manufacturing its products. They use a finite element analysis and multiple testing procedure such as a dynamic and cycle test that helps them replicate real-world conditions and adjust their design accordingly, making the necessary correction even before they manufacture the actual product
Using only the finest materials available, they can create a product that meets its clientele's expectation whether it's for street use or for race application.
Wilwood has also been ISO Certified, making it compliant to all mandated processing procedures set by the regulatory board.
Purchase Wilwood Products at Vivid RacingYour brakes are the most important component of your car. It is easy to make your car fast, but you have to make sure you can equally make it stop as well.
Wilwood has the right product for you. With safety and quality at its core, they are the product you can surely trust. Visit Vivid Racing and check the list of parts that would fit your specific needs.
