1-480-966-3040
Mon-Fri 8am to 5pm AZ
Loading...
See more parts for Volkswagen GTI
Select the year of your Volkswagen GTI:
Vargas Turbocharger Technologies - VTT Ultimate Front Drag Brake Kit HD Version 6 Piston Silver Volkswagen Golf | GTI 2014-2019 VTT-MQB-BRAKE-1-SIL-2-1 | Vivid Racing
Looking to make your MK7 GTi, Golf R, Jetta, etc., faster in the 1/4 mile or 1/2 mile racing? Want to run 15″ wheels, and slicks in the front? Want to drop 63 lbs. of weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Front Drag kit for the MK7 platforms. This kit will allow you to run the wheel/tire combo you need to drop your ET’s all while putting the car on a significant diet over the stock front brake setup.
The kit is a true plug-and-play set up using VTT/Wilwood parts, coupled with DOT-approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor.
This kit comes in 3 different variations in 2 different caliper sizes
HD Version: Normal street driving, and racing duties
VTT Ultimate Drag kit vs OEM Per Side:
Fitment:
The kit is a true plug-and-play set up using VTT/Wilwood parts, coupled with DOT-approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor.
This kit comes in 3 different variations in 2 different caliper sizes
HD Version: Normal street driving, and racing duties
- VTT Custom Cast HD rotors
- Genuine Wilwood Dyna-Pro Calipers
- Genuine Wilwood Brake Pads
- DOT Approved Brake lines
- VTT CNC Rotor Hats
- VTT CNC Brackets
- Brake Sensor CEL Eliminator harness
- Genuine Wilwood Ultra-Lite Scalloped rotors
- Genuine Wilwood Dyna-Lite Calipers
- Genuine Wilwood Brake Pads
- DOT Approved Brake lines
- VTT CNC Rotor Hats
- VTT CNC Brackets
- Brake Sensor CEL Eliminator harness
VTT Ultimate Drag kit vs OEM Per Side:
- OEM Steel PP kit 42.2lbs per side – Total 84.4 lbs.
- VTT HD Spec 37 Rotors – 14.6 Lbs. per side – 29.2 Lbs. total – 55.2 Lbs. savings over Stock steel kit
- VTT HD Cross Drilled Rotors – 13.4 Lbs. per side – 26.8 lbs. total – 57.6 Lbs savings over Stock steel kit
- VTT Scalloped kit – 10.7 Lbs. per side – 21.4 Lbs. total – 63 Lbs. savings over Stock steel kit!!!
- HD Rotor Spec 37- 9 Lbs.
- HD Rotor Cross Drilled- 7.8 Lbs.
- Scalloped Rotor – 5.1 Lbs.
- Dyna Lite Caliper 3.2 Lbs.
- DynaPro Caliper 3.6Lbs
- DynoPro 6 Piston caliper 5.1Lbs
- Rotor Hat 1Lb
- Pads (one side) 1.0 Lbs.
Fitment:
- Volkswagen Golf MK7 2014-2019
- Volkswagen GTI MK7 2014-2019
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Make Vehicle | Model | Year |
---|---|---|
2015-2019 Volkswagen GTI |
GTI | 2015-2019 |
2014 Volkswagen GTI MK7 |
GTI MK7 | 2014 |
2015-2019 Volkswagen Golf |
Golf | 2015-2019 |
2014 Volkswagen Golf MK7 |
Golf MK7 | 2014 |
Check out these other great products

Error: Failed to add product
Please refresh the page and try again.