.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
VTT-FAB is proud to offer the premiere top-mount single turbo kit for the G8X/F9X S58 platforms. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high flowing, and long-lasting manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make.
Kit Includes:
Features:
Note:
Kit Includes:
- Manifold x 1
- Downpipe With clamps x 1
- Charge pipe x 1
- Charge Pipe Hose x 1
- Charge pipe worm clamps x 2
- Oil feed line x 1
- Oil drain line x 1
- Wastegate set up with 2 V-band clamps
- Wastegate Wiring harness extension x 1
- Wastegate arms, clips
- Turbosmart 60mm Straight Gate x 1
- TurboSmart Gen V Raceport BOV (OPTIONAL)
- Factory Actuator Heat Sleeve x 1
- 1/8" NPT straight for PTE, Nothing for TS x 1
- VTT-FAB-062 drain Adapter for PTE x 1
- 040 10an Drain Adapter x 1
- 040 block off adapter x 2
- 038 feed block Adapter x 1
- 037 feed Adapter x 1
- 041 Block Off Adapter x 1
- 075 Block Off Adapter x 1
- Coolant extension harness x 1
- M8 riv nuts x 2
- Coolant bottle rods x 2
- Coolant hose replacement x 1
- Nuts for manifold x 10
- Manifold to hear gaskets x 2
- M6x12mm for 075 Block off x 1
- M8 Drain Bolts x 2
- Head to manifold gaskets x 2
- Downpipe donut gaskets x 2
- Air Filter or Velocity Stack x 1
- VTT-FAB Titanium Turbo Blanket (optional)
Features:
- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- Full 4" Downpipe for every kit (available in factory style termination or Race 4" single with optional turn down)
- All Tig Welded
- VTT-FAB 6 into BILLET COLLECTOR
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control is needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
Note:
- WE HIGHLY, HIGHLY SUGGEST RUNNING OUR ONE WAY BREATHER WHEN ADDING A SINGLE TURBO KIT, AS YOU DELETE MOST OF THE PCV SYSTEM, FAILURE TO ADD THIS OR SOME SORT OF CRANKCASE VENTING LIKELY WILL RESULT IN CRANKCASE PRESSURE, AND POSSIBLY SMOKING. YOU CAN ADD ONE FROM THE DROP DOWNS
- EVERY VTT-FAB SINGLE TURBO KIT IS BUILT TO ORDER, AND CANNOT BE CANCELLED ONCE MADE, PLEASE ORDER CAREFULLY.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.