.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear
See more parts for Audi A4
Select the year of your Audi A4:
VADpro MFD28 2.8" Display Audi A4 | A4 Avant | A4 Quattro 1995-2001 CC31020 | Vivid Racing
MFD28 - 2.8" display Audi A4 (B5) Gen 2
Can read out and display up to 50 values at the same time
with vehicle-specific brackets for ventilation grilles
Key Features:
There are four different logging types available:
Supported values:
Haldex
Can read out and display up to 50 values at the same time
with vehicle-specific brackets for ventilation grilles
Key Features:
- 2.8-inch capacitive touch display
- 8GB SD card memory
- Up to 10 freely configurable pages
- Connection via CAN bus and serial interface
- 4 analog inputs for 0 - 5V sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature (with adapter) and boost pressure)
- Shift light optional
- Performance meter (measure times e.g. 100-200 km/h)
- Individual minimum and maximum warning values
- pop-up function when values are exceeded or not reached
- screen brightness adjustable
- 10 pages freely configurable
- up to 17 widgets per page
- 10 different widgets (digital number, bar, speed, single pointer, log, table switch, image (from SD card), number, circular display, Haldex)
- Widgets can be moved and resized using drag-drop
- Color adjustment is possible depending on the widgets
- Time measurement integrated directly into the display. 0-100; 0-200; 150-200, everything is possible. The time is measured via the speed signal from the control unit, which can also be optionally combined with a 10Hz GPS module.
There are four different logging types available:
- USB: logs all sensor data live via USB
- SD card: all sensor data is also logged on the SD card
- Debug: all CAN bus data is also logged via USB.
- sDbg: all Can Bus data is stored on the SD card (CAN Bus Logger)
Supported values:
- Many customers always ask: "Which values can I query from my control unit". The answer: " ALL " The control unit manufacturers themselves determine which values are sent via the interface and also document them accordingly. A total of up to 50 sensors can be queried with the display if the manufacturer supports this.
- In general, all control units that have a documented CAN bus or a serial interface are supported. The latter is only possible with an optional serial adapter. Most manufacturers supply a "dbc" file, which is then converted into a .tri file for the display. This can also be done by the customer himself using the DBC converter on the manufacturer's website.
- Haldex license
- Shift light
- Serial adapter (VEMS + Ecumaster without CAN)
- Vehicle-specific integration
- trijekt (Premium, Bee, trigifant)
- Megasquirt 2 and 3
- k-data KDFI
- UMC1/UMC2
- EFIgnition
- Microsquirt
- EcuMaster EMU (classic with Can-Bus adapter: EMU Black)
- AIM generic protocol
- LinkECU
- Haltech v2
- MME ECU481 with Can Bus
- SCS Delta GDI4 and Delta
- VAG (Audi / VW / Seat)
- Van kronenburg KMS MD35 (MP25 with CAN-Bus adapter)
- VEMS with a serial adapter
Haldex
- The 2.8" display has the ability to regulate the 4-motion Haldex control (VAG Gen 1 PQ34 platform). Communication takes place via Can-Bus, so no conversion of the Haldex is necessary. The control is activated by a license Scope.
- vehicle-specific bracket for ventilation grilles
- 2.8-inch display
- Cable set
- Fastening screws
- 8 GB micro SD card
- Micro SD card adapter
- Quickstart Guide
- Audi A4 1995-2001
- Audi A4 Avant 1996-2001
- Audi A4 Quattro 1995-2001
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1996-2001 Audi A4 |
A4 | 1996-2001 |
|
1996-2001 Audi A4 Quattro |
A4 Quattro | 1996-2001 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.