.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
If you want to run multiple bolt pattern wheels on the rear of your Corvette it's difficult to use adapter spacers because the car has such a high offset, you need like +60 wheels so we're offering multi-pattern hubs! Run Chevy 5x4.75, GM/BMW/Newer Japanese 5x120 and thousands of Ford/Japanese 5x114.3 wheels.
You unbolt your factory hub/bearing assembly from the spindle with three torx bolts, unbolt the axle and re-install everything, drill your rotor holes to 3/4" (19mm) with a step drill and use whatever wheels you want on the same day.
Sold as a set (2 hubs)
Requires use of wheel bolts or thread-in wheel studs, sold separately.
Manufactured and Assembled in USA
Fitment:
You unbolt your factory hub/bearing assembly from the spindle with three torx bolts, unbolt the axle and re-install everything, drill your rotor holes to 3/4" (19mm) with a step drill and use whatever wheels you want on the same day.
Sold as a set (2 hubs)
Requires use of wheel bolts or thread-in wheel studs, sold separately.
Manufactured and Assembled in USA
Fitment:
- Cadillac XLR
- Chevrolet Corvette C6 | C5
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.