1-480-966-3040
Mon-Fri 8am to 5pm AZ
Loading...
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers.
With its super efficient Class-bd circuit topology, the P500X1bd will drop some serious BASS! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
Features:
With its super efficient Class-bd circuit topology, the P500X1bd will drop some serious BASS! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
Features:
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- Features C.L.E.A.N. Set-up
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- 1 Year Warranty
- Number of Channels: 1
- Total Power (Sum of Rated Power): 500 Watts
- Rated Power (RMS Continuous Power):
- 150 Watts x 1 @ 4-Ohm
- 300 Watts x 1 @ 2-Ohm
- 500 Watts x 1 @ 1-Ohm
- Dynamic Power (PVC/PowerCube®):
- 224 Watts x 1 @ 4-Ohm
- 410 Watts x 1 @ 2-Ohm
- 787 Watts x 1 @ 1-Ohm
- Bridgeable: No
- Frequency Response: 20Hz to 250Hz +/- 1.0dB
- Input Sensitivity: 150 mV - 12 V
- Circuit Topology Class: Class BD
- Efficiency (average): 86% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise):
- 4-Ohm: <1.0%
- 2-Ohm: <1.0%
- 1-Ohm: <1.0%
- Signal Input: Hi/Low level: 1 RCA pair
- Signal Output: Low level: 1 RCA pair
- Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz
- Crossover Controls:
- Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
- Infrasonic Filter (IF): 28Hz @ 12dB/Octave
- All-Pass (AP): No
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators:
- Power/Protect/Thermal LED
- Input Clip LED3
- Output Clip LED1,2,3
- LED Color Legend: 1BLUE: <0.5% THD
- 2VIOLET: 1% THD
- 3RED: 10%+ THD
- Power Wire Gauge: 4 AWG
- Power Input Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Speaker Output Connector: Captive C-Clamp
- Cooling: Convection
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 80 A
- Average Current Draw (13.8V Music): 35 A
- Max. Current Draw (13.8V Sinewave): 70 A
- Suggested Alternator: 75 A
- Dimensions (H x W x D):
- 2.38 x 7.76 x 11.03 (in)
- 6.05 x 19.71 x 28.02 (cm)
- Shipping Weight: 10.8 Lbs. (4.89 Kg.)
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Since day one, Rockford Fosgate® spearheaded the car audio revolution. Nothing's changed. Rockford Fosgate is still the global leader in audio innovation, design and engineering, delivering an experience of passion through sound to drivers, boaters, motorcyclists and off-road enthusiasts.
Rockford Corporation offers a limited warranty on Rockford Fosgate products:Length of Warranty
- All Speakers – 1 Year
- Signal Processors – 1 Year
- PRIME Amplifiers – 1 Year
- PUNCH Amplifiers – 1 Year
- POWER Amplifiers – 2 Years
- Any Factory Refurbished Product – 90 days (receipt required)
Check out these other great products

Error: Failed to add product
Please refresh the page and try again.