1-480-966-3040
Mon-Fri 8am to 5pm AZ
Loading...
The Power T600-4 is a 4-channel amplifier capable of producing 150 Watts into each of its four channels at 2-Ohms. The T600-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers.
Features:
The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers.
Features:
- 24dB/octave crossover
- 2/4 channel input switch
- MOSFET power supply
- MOSFET output stage
- 4 Gauge power/ground connectors
- Audiophile grade speaker connections
- RCA pass-thru outputs
- 2-Year Warranty
- Number of Channels: 4
- Total Power (Sum of Rated Power): 600 Watts RMS
- Rated Power (RMS Continuous Power):
- 100 Watts x 4 @ 4-Ohm
- 150 Watts x 4 @ 2-Ohm
- 300 Watts x 2 @ 4-Ohm Bridged
- 2-Ohm x 2 Bridged Stable
- Dynamic Power (PVC/PowerCube®):
- Front Channels
- 139 Watts x 2 @ 4-Ohms 0° Res
- 236 Watts x 2 @ 2-Ohms 0° Res
- Rear Channels
- 140 Watts x 2 @ 4-Ohms 0° Res
- 236 Watts x 2 @ 2-Ohms 0° Res
- Bridgeable: Yes
- Frequency Response: 20Hz to 20kHz +/- 1dB
- Input Sensitivity: 150 mV to 4 V
- Circuit Topology Class: Class A/B
- Efficiency (average):
- 70% @ 4-Ohm
- 64% @ 2-Ohm
- Total Harmonic Distortion (THD+Noise):
- 4-Ohm: <1.0%
- 2-Ohm: <1.0%
- Signal Input:
- Front Low level: 1 RCA pair
- Rear Low level: 1 RCA pair
- Input Switch: 2CH / 4CH
- Signal Output: Low Level: 1 RCA pair
- Tone Controls:
- Front Channels - Punch EQ
- Treble: 0dB to +12dB @ 12kHz
- Bass: 0dB to +18dB @ 45Hz
- Rear Channels - Punch EQ
- Treble: 0dB to +12dB @ 12kHz
- Bass: 0dB to +18dB @ 45Hz
- Crossover Controls:
- Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
- Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
- Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
- Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
- Remote Controls: Optional Remote Punch EQ (overrides rear channel built-in Punch EQ)
- Visual Indicators:
- Power
- Thermal
- Protect
- Power Wire Gauge: 4 AWG
- Power Input Connector: Block
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Speaker Output Connector: Screw terminal barrier strip
- Cooling: Convection
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 80 A
- Average Current Draw (13.8V Music): 40 A
- Max. Current Draw (13.8V Sinewave): 80 A
- Suggested Alternator: 75 A
- Dimensions (H x W x D):
- 2.14 x 8.14 x 14.91 (in)
- 5.42 x 20.68 x 37.86 (cm)
- Shipping Weight: 12.00 Lbs. (5.44 Kg.)
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Since day one, Rockford Fosgate® spearheaded the car audio revolution. Nothing's changed. Rockford Fosgate is still the global leader in audio innovation, design and engineering, delivering an experience of passion through sound to drivers, boaters, motorcyclists and off-road enthusiasts.
Rockford Corporation offers a limited warranty on Rockford Fosgate products:Length of Warranty
- All Speakers – 1 Year
- Signal Processors – 1 Year
- PRIME Amplifiers – 1 Year
- PUNCH Amplifiers – 1 Year
- POWER Amplifiers – 2 Years
- Any Factory Refurbished Product – 90 days (receipt required)
Check out these other great products

Error: Failed to add product
Please refresh the page and try again.