.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear
See more parts for BMW 316
Select the year of your BMW 316:
This flex disc is for a 1983-1991 E30 BMW 3-series with an M50/M52/S50/S52 engine swap. It adapts the 96mm/12mm ZF transmission flange to the 78mm/10mm E30 driveshaft. It allows you to retain the oem 325i driveshaft when doing a 24v engine and ZF transmission swap. (Not compatible with the 4-cylinder driveshaft)
It can also be used when swapping a Getrag transmission with a ZF transmission in an E36.
The Revshift race flex disc frame is made from 6061-T6 billet aluminum and utilizes high quality polyurethane bushings to maximize stiffness and strength while maintaining an appropriate amount of flex.
FOR RACE USE ONLY! This part is very rigid and requires precise installation. The driveline must be properly aligned and all driveline components must be in good condition and properly balanced. The engine mounts, trans mounts, differential bushings, and subframe bushings must all be rigid to prevent driveline movement. We recommend a hardness of 95a or higher for these components. A new center support bearing and driveshaft centering bushing are also recommended. Some clearancing on the output flange may be necessary to clear the driveshaft bolts.
Features:
Fitment:
It can also be used when swapping a Getrag transmission with a ZF transmission in an E36.
The Revshift race flex disc frame is made from 6061-T6 billet aluminum and utilizes high quality polyurethane bushings to maximize stiffness and strength while maintaining an appropriate amount of flex.
FOR RACE USE ONLY! This part is very rigid and requires precise installation. The driveline must be properly aligned and all driveline components must be in good condition and properly balanced. The engine mounts, trans mounts, differential bushings, and subframe bushings must all be rigid to prevent driveline movement. We recommend a hardness of 95a or higher for these components. A new center support bearing and driveshaft centering bushing are also recommended. Some clearancing on the output flange may be necessary to clear the driveshaft bolts.
Features:
- 6061-T6 billet aluminum frame
- 95A polyurethane bushings
- Enables use of oem driveshaft
- For race use only!
Fitment:
- BMW 316 1983-1990
- BMW 316i 1987-1991
- BMW 318i 1983-1991
- BMW 318is 1989-1991
- BMW 320i 1983-1991
- BMW 320is 1983-1991
- BMW 323i 1983-1985
- BMW 324d 1985-1991
- BMW 324td 1987-1991
- BMW 325 1986-1988
- BMW 325e 1985-1987
- BMW 325es 1986-1988
- BMW 325i 1985-1991
- BMW 325iX 1985-1991
- BMW 325is 1985-1991
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1983-1990 BMW 316 |
316 | 1983-1990 |
|
1987-1991 BMW 316i |
316i | 1987-1991 |
|
1983-1991 BMW 318i |
318i | 1983-1991 |
|
1989-1991 BMW 318is |
318is | 1989-1991 |
|
1983-1991 BMW 320i |
320i | 1983-1991 |
|
1983-1991 BMW 320is |
320is | 1983-1991 |
|
1983-1985 BMW 323i |
323i | 1983-1985 |
|
1985-1991 BMW 324d |
324d | 1985-1991 |
|
1987-1991 BMW 324td |
324td | 1987-1991 |
|
1986-1988 BMW 325 |
325 | 1986-1988 |
|
1985-1987 BMW 325e |
325e | 1985-1987 |
|
1986-1988 BMW 325es |
325es | 1986-1988 |
|
1985-1991 BMW 325i |
325i | 1985-1991 |
|
1985-1991 BMW 325iX |
325iX | 1985-1991 |
|
1985-1991 BMW 325is |
325is | 1985-1991 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.