.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
Permatex Marine H2 Hold Epoxy bonds underwater applications without breaking and can be used on both under and above water repairs. This industrial strength waterproof epoxy is ideal for surfaces exposed to salt or freshwater such as portable water tanks, fuel tanks, drains, boats, and more!
Ideal for marine and surfaces exposed to heavy water usage including fiberglass, PVC, metal, wood, plastics and more.
Directions: 1. For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired. 2. Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and pull plunger back slightly (1/8?). Allow air bubbles to rise to top. Snap off and save storage cap. 3. Push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface such as a piece of cardboard or the plastic container on the front of this package. Pull back plunger to stop flow. 4. MIX THOROUGHLY with paddle provided. Epoxy has a working time of 10 minutes. 5. Apply to surfaces to be joined or repaired. Epoxy will fixture in 2 hours and fully cure in 24 hours. Wipe nozzle clean. Replace cap for storage.
Safety Data Sheet
Technical Data Sheet
Features:
Specifications:
Ideal for marine and surfaces exposed to heavy water usage including fiberglass, PVC, metal, wood, plastics and more.
Directions: 1. For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired. 2. Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and pull plunger back slightly (1/8?). Allow air bubbles to rise to top. Snap off and save storage cap. 3. Push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface such as a piece of cardboard or the plastic container on the front of this package. Pull back plunger to stop flow. 4. MIX THOROUGHLY with paddle provided. Epoxy has a working time of 10 minutes. 5. Apply to surfaces to be joined or repaired. Epoxy will fixture in 2 hours and fully cure in 24 hours. Wipe nozzle clean. Replace cap for storage.
Safety Data Sheet
Technical Data Sheet
Features:
- Flexible water-proof adhesive that sticks and cures underwater
- Shock and vibration resistant
- Permanent strength up to 4,000 PSI
- Dries off-white
- Sets in 15 minutes, cures in 1 hour
Specifications:
- Units Per Case: 6
- Size: 25 ML
- Will not bond to polyethylene or polypropylene plastics
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.