See more parts for Audi TT
Select the year of your Audi TT:
Product thumb
Paragon Alcon Front Mono 6 Big Brake Kit Audi TT | TTS 8J 2006-2014
$2900.00
Free Shipping
Paragon brake kits provide superior braking performance and come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials/components were used to ensure the brake kit to perform and last under both street and track conditions. Alcon's experience in top level motorsport including NASCAR, F1, and WRC further enhanced the exceptional performance of this brake kit.

Curved Directional Ventilation Vanes
Features 48 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.

Slotted Friction Face
Slotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.

Floating Bobbins & Mounting System
Utilizes T-Bobbin rotor to hat mounting system to allow "float" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.

Caliper Mounting Brackets
CNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.

Feature:
  • Features Alcon CAR97 Monobloc 6 piston calipers
  • Paragon floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors
  • Direct bolt-on without any modifications. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes
  • Designed to provide shorter brake distance and less brake fade, while offering optimum bite, better modulation, thermal stability, and durability
  • Low Noise, vibration, and harshness (NVH). Suitable for daily driven vehicles
  • Recommended usage: Street performance / Track
  • Rotor to hat mounting system: Floating T-Bobbin (12 bolt)
  • Complete pre-assembled axle set
  • One pair of Alcon CAR97 Monobloc 6 piston calipers
  • One pair of Paragon 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips 
  • One set of Paragon P2 “Sport Comfort” brake pads (manufactured by Winmax Japan, other compounds available at additional cost)
  • One pair of caliper mounting brackets and all necessary hardware
  • One pair of Goodridge DOT approved stainless steel braided brake lines
  • Detailed installation manual
  • PBK.50.098.355.320.TL.01.0x.Px.F (355x32mm Rotor)
  • PBK.50.098.380.320.TL.01.0x.Px.F (380x32mm Rotor)
  • Lightweight single-piece aluminium Mono-bloc design for optimum strength
  • Staggered piston bore sizes for improved brake balance and even pad wear
  • High stiffness (firm pedal)
  • Pin-mounted pads provide low threshold pressure and minimize unwanted noises 
  • Features dust seals to improve durability and protection against debris / road salt
  •  Floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads
  • Superior braking and cooling efficiency
  • Features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking
  • Made of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability
  • Heat treated to release stress in the rotor to avoid deformation and vibration
  • State-of-the-art CBN surface machining to ensure better break-in with new brake pads
  • Excellent thermal capacity to minimize brake fade
  • CNC machined from lightweight 6061-T6 aerospace grade aluminum
  • Unsprung weight reduction
  • High strength and durability
  • Black hard coat/hard anodized to increase resistance to wear and corrosion
  • Manufactured by Winmax Japan
  • Superior stopping power and modulation
  • High fade resistance
  • Consistent performance under high temperature conditions
  • Compounds available for street, street / track, and dedicated track applications
  • Superior durability. Abrasion and corrosion resistant
  • Allows more responsive and firmer pedal feel
  • DOT / TÜV certified
  • Direct bolt-on without any modifications
  • Properly sized piston and pad volume. Designed to work flawlessly with OEM ABS and brake master cylinder while maintaining proper brake bias
  • Compatible with OEM rear brakes
Install Instructions:Fitment:
  • Audi TT / TTS (8J) Front 2006-2014
Note:
  • 355mm brake kits generally require 18" or larger wheels, 380mm brake kits generally require 19" or larger wheels. Fitment varies due to different specs / wheel design. Verify fitment with wheel fitment template.
Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle
2007-2014
Audi TT
2007-2014
Audi TT Quattro

Alcon Logo

About Alcon Kits

Alcon Kits is an independent authorized dealer of Alcon Specialist Brakes and Clutches. Alcon designs and manufactures ultra-high quality, low-volume brake, clutch, and other automotive components. It supplies brake kits, braking accessories, and maintenance parts to the automotive aftermarket. Alcon Kits carries brake kits for Audi, BMW, Chevrolet, Porsche, Mitsubishi, Nissan, Subaru, and many others! The company is owned and operated by MotoDelta Motorsports, who has been distributing parts and services to Midwest sports cars for over 40 years!

Who Is Alcon?

Alcon was established in 1983 by engineer and sports car racer John Moore. The company initially made brakes for Audi Sport’s Group B Quattro rally cars. Today, Alcon provides a comprehensive lineup of braking solutions for the top echelons of motorsport, all from its factory and headquarters in Tamworth, England. Alcon supplies its parts to customers all around the globe who demand the very best in the OEM, performance aftermarket, and motorsport sectors.

Alcon has been at the vanguard of motorsport braking for over three decades. Alcon maintains a world-renowned reputation for supplying some of the most prestigious marques including, Bentley, Brabus, Jaguar, and Audi, as well as some of the most extreme applications like the 900bhp/ton Ariel Atom 500 and the 225 mph Noble M600. No matter what you drive or what your needs are, Alcon knows exactly what you need to get to the top. With extensive know-how and laudable real-world experience, Alcon remains a leader in the aftermarket.

Alcon Is Trusted Worldwide

Motorsports teams all around the world are benefitting from Alcon brakes and now so can you, regardless of the level you are competing at. Alcon supplies race-winning technology to Formula 1 teams and ultimate stopping power for drivers like Sebastien Loeb to win seven World Rally Championship Driver’s titles. Alcon’s success stems from its extensive expertise, which is both learned and applied at the very pinnacle of the automotive industry: motorsports. The company’s latest involvements include some of the best teams in Global Rallycross, numerous teams in America’s off-road series, and all vehicles in the new Formula E series.

The same expertise that Alcon supplies to professionals is also available to owners who wish to upgrade their street cars for enhanced performance on the road and track. Alcon knows what winning takes and how to deliver it too. Its clients and their respective expectations are as wide-ranging as the products Alcon supplies. The only common factor remains the brand’s no-compromise approach to engineering excellence. From small brake-by-wire controllers for Formula E to brakes that can stop 35-ton armored vehicles, Alcon is the answer. 

Find Alcon Brakes at Vivid Racing

There is no better time than right now to upgrade your vehicle’s stopping ability. Vivid Racing carries a wide range of Alcon Kits and products, including slotted rotors, replacement rotors, and big brake kits for several different makes and models. If you have any fitment concerns or cannot find what you are looking for here, please contact our expert parts team at (480) 966-3040. We will help you find exactly what you need to deliver unmatched safety and stopping ability that is used in some of the most demanding applications worldwide.

Alcon Store | Alcon Big Brake Kits | Alcon Rotors | Alcon Slotted Rotors

Check out these other great products