Overview of the LSK1102 Race Kit for 1999-2006 Chevrolet Silverado 1500 4WD

If you're a proud owner of a 1999-2006 Chevrolet Silverado 1500 4WD, the LSK1102 Race Kit from LSK Suspension is designed just for you. This comprehensive kit transforms your truck's suspension system, enhancing both on-road comfort and off-road capability. Whether you’re tackling rugged terrains or cruising the streets, this kit ensures your ride quality is vastly improved.

What’s Included in the Kit

The LSK1102 Race Kit comes packed with everything you need to upgrade your suspension:

• Custom Upper Control Arms
• Custom Lower Control Arms
• Fully Fabricated Spindles
• Machined Centerlink
• Extended Heimed Tie Rods with Machined Steering Clevis
• Shock Towers with Integrated Upper Control Arm Mounts
• Shock Hoops
• Grade 8 Hardware
• Extended Brake Lines (Minimum 33" Line End to End)

Installation Requirements

Before diving into installation, please note that this isn't a simple bolt-on upgrade. Here's what you'll need:

• 8" x 2.5" Coilovers (NOT INCLUDED)
• 8" x 3.0" Bypass Shocks (NOT INCLUDED)
• Welding is required; proficient knowledge in fabrication is necessary for installation.
• RCV Axle Assemblies, which are not included. Contact our sales team to find the right axle option for your setup.
• Possible extension of factory ABS sensor lines depending on your wiring routing.
• Bumpstops, which can be configured to bump off the lower control arm, upper control arm, or spindle uniball cup. We typically recommend a King 2.0" x 2" stroke with King fabricated cans.
• Limit Straps; we recommend a 10" limit strap with an adjustable clevis kit (available in our Builders Components section).

Specifications

Here’s what you can expect in terms of performance and fitment:

• Recommended Tire Size: 37"
• Recommended Wheel: 17 x 9" with 4.5" backspacing (0mm offset)
• Track Width: Extended by 4.5" on each side
• Wheel Base: Extended 1.25" forward
• Wheel Travel: Averages 13.5" of usable wheel travel

Fitment

This kit is specifically designed for:

• Chevrolet Silverado 1500 (1999-2006)

Important Notes

• Coilovers and bypasses are custom-ordered and may not always be in stock. Please email our sales team for current lead times.
• For the upper control arms, use 7/8in-14 rod ends, which can be purchased through our online store under Builders Components.
• Spindles require a 1.00in FK Uniball (PN: WSSX16T), available in our store.
• Lower control arms need a 1.50in FK Uniball (PN: COMH24T) and LSK 1.75in Delrin bushings, also available online.
• This kit requires permanent frame modification as the shock tower replaces the factory shock and upper control arm mounts.

Upgrade your Silverado 1500 with the LSK1102 Race Kit and experience the difference in ride quality and performance—whether you're hitting the trails or cruising the streets.