.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear Select the year of your Ford Bronco:
The Injen Technology SES9300RS Race Series exhaust system was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty off-road beasts. Not only does this exhaust fit both 2-door and 4-door models, the SES9300RS also fits either the 2.3L Turbo or the 2.7L Twin Turbo with no additional modifications. Our straight through, single exit design was developed to give you the most exhaust flow out of any cat-back system found in the market today.
The entire length of the SES9300RS was constructed from massive 3.00in (76mm) mandrel-bent 304 stainless-steel tubing. This massive tubing allows those turbos to breathe and perform at their peak efficiency. The rear section consists of a race inspired 3.00in (76mm) mandrel bent tube that tucks into the undercarriage for the most ground clearance possible. It's single exit, straight through tip is designed to give you the most exhaust flow and yields an aggressive, race inspired, deep exhaust tone.
Injen Technology designs every performance product with ease of installation in mind and this exhaust is no different. On the SES9300RS we've included high quality exhaust band clamps for the simplest, quickest installation possible. No need for any cutting, drilling, or modification of the vehicle to complete installation. The system uses all factory mounting points for simple and convenient placement and compatibility. To increase performance, we opted for a single 3.00in (76mm) pipe size from flange to tip to keep flow rates consistent. Keeping the flow rate consistent not only adds performance but also helps keep the tone of the exhaust where we designed it to be throughout the RPM range.
An aftermarket exhaust system is one of the simplest modifications you can make to your vehicle that will add both power and personality to your ride. We make choosing an exhaust system easy with our superior build quality, tone, and performance. All protected by the world renowned Injen Limited Lifetime Warranty.
Race Series Performance Exhaust System, Part No. SES9300RS, 2021-2022 Ford Bronco L4-2.3L Turbo / V6-2.7L Twin Turbo
Features
- Catalytic Converter Quantity: N/A
- Compatible Throttle Controller: PT0013B
- Exhaust Tip Finish: Stainless Steel
- Exhaust Tip Material: Stainless Steel
- Exhaust Tip Outside Diameter: 3.00
- Exhaust Tip Quantity: 1
- Front Section Pipe OD: 3.00
- Grade Type: Performance
- Hangers Included: Yes
- Hardware Included: Yes
- Mid Section Pipe OD: 3.00
- Muffler Body Material: 304 Stainless Steel
- Muffler Body Shape: N/A
- Muffler Quantity: N/A
- Pipe Material: 304 Stainless Steel
- Prop 65 - Short Label: prop65_warning
- Prop 65 (C, R or CR): CR
- Prop 65 Yes/No: Yes
- Rear Section Pipe OD: 3.00
- Title: Injen Race Series Performance Exhaust System
- Y-Pipe Included: N/A
- Y-Pipe Material: N/A
Fitment:
- Ford Bronco L4-2.3L Turbo / V6-2.7L Twin Turbo 2021-2025
- Fits 2-Door and 4-Door Models
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2021-2025 Ford Bronco |
Bronco | 2021-2025 |
Injen is highly recognized in the automotive industry. The company started in 1991 and specializes in manufacturing high-quality air induction products. The company has become the go-to brand by multiple import tuners and has since become an automotive icon in the industry.
Years of ExperienceFor more than three decades, the company has created dozens of patents and thousands of new products. All of their products are dyno-tested to ensure that it provides optimum performance to the vehicle it is applied to.
Injen offers a variety of products ranging from intake systems, intercoolers, exhaust systems, and other performance parts. All their products are made out of high-quality materials and are designed by the industry’s top designers and engineers. This enables them to create products that are not only functional but adds an aesthetic value to the vehicle. Even up to now, the company never stops in improving its product. Hence, they are a favorite of tuners who wanted to have the best.
Purchase Injen Products at Vivid RacingIf you are looking for products that provide performance gains and are tried and tested, then Injen is the brand for you. They have been used by thousands of enthusiasts worldwide and have provided them high-performance products they truly deserve. The company has one of the most comprehensive lists of products that applies to most vehicles available in the market. You can never go wrong with Injen.
Visit Vivid Racing and check out their list of products that would fit your specific needs.
Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology.s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.
EXHAUST WARRANTY
Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. Injen Technology will replace at no charge, any exhaust system considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.
AIR INTAKES AND ACCESSORIES
Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.
SES INTERCOOLERS AND EXHAUST SYSTEMS
Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Defective parts will be replaced or repaired as deemed necessary by Injen Technology. All other warranty issues will apply as indicated under the Air Intake section. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.
