Transform Your Engine's Breathing

Say hello to a smoother ride with our innovative kit designed to help both you and your engine breathe easy. This kit features a mandrel-bent 4.5-inch LBZ style intake tube, allowing for impressive airflow gains. Plus, with HSP's signature heat shield box, you can keep unwanted hot air from sneaking into the cold air intake.

Performance Matters

Did you know that for every 1-degree rise in intake air temperature, you could lose 3hp? That's why our kit is built to keep things cool and efficient. It also includes HSP's high flow turbo mouthpiece, which gives you the flexibility to reroute your factory PCV system and remove the factory resonator box. This helps eliminate the pesky issue of engine oil gumming up your turbo and intake system. (For the PCV re-route, check out part number 003-1-HSP.)

Quality Components for a Reliable Fit

Included in this kit, you’ll find our 3-inch mandrel bent hot and cold side tubes, paired with a user-friendly two-piece Y-bridge. We’ve made sure to use race-proven 5-layer silicone boots, ensuring a snug fit that won’t let you down. The factory hot side intercooler tube is only 2.25 inches in diameter and has a 90-degree boot at the intercooler, which is known for its tendency to fail.

Smart Routing for Maximum Efficiency

Worried about the hot side intercooler tube rubbing against the power steering line? Our design addresses this concern by routing the hot side tube directly into the intercooler. This not only leads to lower temperatures and better airflow but also provides added clearance in tight spots.

Ensuring Airflow for Your Engine

Our 3-inch cold side tube guarantees that your engine gets all the air it craves. The two-piece Y-bridge bolts together easily, creating a leak-free seal that keeps you on the road without worry. We’ve also included a robust 2-inch passenger side up pipe featuring .120 inch tubing and the best bellow on the market. The factory up-pipe is known to fail at the riser due to excessive heat and pressure, but not with our solution!

Included Components:

• 2x 3 inch x 4 inch Straight boot
• 5x 3 inch T-bolt Clamps
• 1x 2.25 inch - 3 inch Reducer Boot
• 1x 2.25 inch T-bolt Clamp
• 1x Bridge Neck O-Ring
• 2x Bridge Neck Stud
• 2x Bridge Neck 12-point Nut
• 2' of Heater hose
• 2x 5/8 inch worm Gear Clamp
• 1x 1/8 inch NPT Brass Plug
• 2x M4x.7x10mm Bolt
• 3x 10-32 x 3/8 inch Button Head Screw
• 4x 1/8 inch Aluminum Rivet
• 1x 4 inch - 4.5 inch Reducer Boot
• 1x 4 inch T-Bolt Clamp
• 1x 4.5 inch T-Bolt Clamp
• 1x 4.5 inch Filter
• 16 inch of Trim seal
• 1x Turbo Inlet O-Ring
• 1x Up-Pipe Gasket (Turbo Side)
• 1x Up-Pipe Gasket (Manifold Side)

Compatibility Information:

This kit is compatible with:

• LLY: 04.5-05 VIN Code 2

Wondering how to find your VIN code? The engine code is determined by the 8th character of the VIN number, while the 10th character indicates the year of the truck.