Revitalize Your Engine with Our Premium Kit

Say goodbye to engine strain and hello to effortless breathing! Our kit is designed to give your engine the airflow it craves. With a stunning 4 1/2 inch mandrel bent intake tube, you'll experience significant gains in airflow, while HSP's signature heat shield box keeps unwanted hot air at bay. Just remember, for every 1-degree increase in intake air temperature, you could lose up to 3 horsepower!

Key Features

This kit is packed with thoughtful features, including HSP's high flow turbo mouthpiece. This innovative addition lets you reroute your factory PCV system and ditch the factory resonator box, preventing engine oil from gumming up your turbo and intake system. (Keep in mind, the PCV re-route is sold separately; check out 003-1-HSP for that.)

Easy Installation

You'll also love our 3-inch mandrel bent hot and cold side tubes, paired with an easy-to-install two-piece Y-bridge. With race-proven 5-layer silicone boots, you can rest assured that you'll get a perfect fit that won't let you down. The factory hot side intercooler tube is just 2.25 inches in diameter and has a 90-degree boot at the intercooler, which can be a weak spot prone to failure.

Smart Routing for Better Performance

We’ve thought of everything! The routing of our hot side tube goes directly into the intercooler, reducing temperatures, enhancing airflow, and providing added clearance in tight spaces. Our bolted together two-piece Y-bridge makes installation a breeze, ensuring a leak-free seal that keeps you on the road.

Durable Components

Included in the kit is a robust 2-inch passenger side up pipe, featuring .120 inch tubing and the best bellow available. The factory up-pipe is often vulnerable to failure due to heat and pressure, but ours is built to last.

What’s Inside the Box?

• 3x 3 inch x 4 inch Straight boot
• 7x 3 inch T-bolt Clamp
• 1x 2.25 inch - 3 inch Reducer boot
• 1x 2.25 inch T-bolt clamp
• 1x 5/8 inch Heater Hose
• 1x 1/8 inch NPT Brass plug
• 2x Bridge Neck O-ring
• 2x 5/8 inch Worm Gear clamp
• 2x Bridge neck stud
• 2x Bridge neck 12-point Nut
• 3x 10-32 x 3/8 inch Button head screws
• 4x 1/8 inch Aluminum rivet
• 1x 4 inch - 4.5 inch reducer boot
• 1x 4 inch t-bolt clamp
• 1x 4.5 inch t-bolt clamp
• 1x 4.5 inch filter
• 1x turbo inlet o-ring
• 1x up-pipe gasket (turbo side)
• 1x up-pipe gasket (manifold side)
• 2 ft of heater hose
• 16 inch of trim seal

Compatibility

This kit is compatible with:

LMM: 07.5-10 VIN Code 6

Wondering how to find your VIN code? The engine code is determined by the 8th character of your VIN number, while the 10th character indicates the year of your truck.