Transform Your Engine's Airflow

This kit is designed to help both you and your engine breathe a little easier. With a mandrel-bent 4.5-inch intake tube, you'll experience impressive airflow gains. Plus, HSP's signature heat shield box works hard to keep unwanted hot air from sneaking into your cold air intake. Remember, for every 1-degree rise in intake air temperature, you could lose up to 3 horsepower!

High Flow Turbo Mouthpiece

Our turbo mouthpiece lets you reroute your factory PCV system while removing the factory resonator box. This change helps prevent engine oil from gumming up your turbo and intake system (please note that the PCV re-route is sold separately; check out 003-1-HSP for that). You’ll also receive our 3-inch mandrel bent hot side and cold side tubes, along with a user-friendly two-piece Y-bridge. With race-proven 5-layer silicone boots, you can count on a perfect fit that won't let you down.

Say Goodbye to Boost Leaks

Did you know that the factory hot side intercooler tube is just 2.25 inches in diameter? It has a 90-degree boot at the intercooler that can be a weak point. In some cases, this tube can rub against the power steering line, leading to a boost leak. But don’t worry; HSP has the solution! Our design routes the hot side tube directly into the intercooler, resulting in lower temperatures, improved airflow, and extra clearance in those tight spaces.

Easy Installation

Our bolted-together two-piece Y-bridge makes installation a breeze, ensuring a leak-free seal that keeps you on the road. We’ve also included one of our 2-inch passenger side up pipes, featuring .120 inch tubing and the best bellow on the market. The factory up-pipe often fails at the riser due to excessive heat and pressure, but you can trust our upgrade to stand the test of time.

Included Components

• 7x 3 inch T-bolt Clamp
• 1x 2.25 inch - 3 inch Reducer Boot
• 1x 2.25 inch T-Bolt Clamp
• 3x 3 inch x 4 inch Straight Boots
• 1x 1/8 inch NPT Brass Plug
• 1x Bridge Neck O-Ring
• 2x 5/8 inch Worm Gear Clamps
• 2x Bridge Neck Stud
• 2x Bridge Neck 12-Point Nut
• 2x M4x.7x10mm Bolt
• 3x 10-32 x 3/8 inch button head screws
• 4x 1/8 inch Aluminum Rivet
• 1x 4 inch - 4.5 inch Reducer Boot
• 1x 4 inch T-Bolt Clamp
• 1x 4.5 inch T-Bolt Clamp
• 1x 4.5 inch Filter
• 1x Turbo inlet o-ring
• 1x Up-pipe Gasket (Turbo side)
• 1x Up-pipe Gasket (Manifold Side)
• 16 inch of Trim Seal
• 2 Feet of 5/8 inch Heater Hose

Compatibility

This kit is compatible with:

• LBZ: 06-07 VIN Code 2 or D

If you're wondering how to find your VIN code, just look at the 8th character of the VIN number to identify the engine code. The 10th character indicates the year of your truck.