.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear Select the year of your Dodge Challenger:
Fitment:
- Dodge Charger | Challenger Mopar | Inc. Scat Pack | SRT | Hellcat 2015+
Specific Notes for 2015+ Mopar:
- All 15+ Mopar axles are designed to work with the factory 32 spline SRT, Hellcat, Demon, RedEye, and 1320 differential, along with the 35 spline wheel hubs.
- All Mopar axles will require you to swap the factory ABS ring onto the GForce Axles!
- All Mopar platforms have a less than ideal axle angle from the factory. These axles are not intended to use on lowered cars! While our CV's are considered a wear item, it is worth noting that CV assemblies and boots will see accelerated wear or possibly binding and clearance issues with lowered cars, so we strongly suggest to avoid lowering these cars.
- The boot location with the factory shock is already tight on clearance. We suggest to loosen the upper mount to try and shift the shock body away from the axle to help gain any additional clearance if necessary. Aftermarket shocks or coilovers may not clear and require aftermarket shock mounting solutions.
- Our average customer with the combined 15+ platforms is around 800-900hp, with a considerable number of cars well beyond that, including some record breaking cars pushing upwards of 1500hp in near full weight vehicles. The OEM rear end should never be considered reliable for this power level as many of the customers running at that level are going through multiple differentials. The 15+ Modified Mopar 9" conversion kit helps address the axle angle issues present from the factory and also gives you a stronger rear end to work with. At the heavier weight of this platform, we are really asking a lot of the axles to support the higher levels of torque and weight, so it is critical that the car should be dialed in with the suspension setup and proper torque management when leaving the line.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2015-2021 Dodge Challenger |
Challenger | 2015-2021 |
|
2015-2021 Dodge Charger |
Charger | 2015-2021 |
GForce Performance Engineering is a genuine manufacturer of high-performance axles, CV-shafts, and driveline components. GForce Engineering's hand-assembly and strict quality methods have established them as the industry's leader in performance driveline components, allowing them to provide an industry-leading lifetime warranty on a number of their products.
GForce Axles strives to provide its customers with the greatest goods and service at the lowest possible prices. GForce Axles takes great pride in their company, their dedication to customer service and in the products they sell. Their online store is intended to provide a safe and secure environment in which you can browse their product catalog.
GFORCE AXLE DESIGNTo stay up with today's more powerful automobiles, GForce Performance Engineering has redesigned its complete axle lineup for 2019, including new Renegade axles and improved Outlaw axles. GForce Axles are direct replacements for factory half-shafts and are suitable for vehicles with moderate bolt-on modifications to those equipped with superchargers and turbochargers. These axles have a 1000 horsepower rating. The 1000HP axles are machined from patented aerospace billet aluminum and feature a 28-spline axle bar and custom-built CV joints. The GForce entry-level axles are the strongest available because of the bigger diameter axle bars and quality aerospace. These axles are not designed to fail. Along with enhanced strength, the 1000HP axles incorporate anti-wheel hop technology. Originally introduced by General Motors several years ago, all GForce axles incorporate this technology and significantly reduce wheel hop during hard launches. Additionally, all GForce axles contain CNC machined billet steel inner and outer stubs. The GForce inner and outer 1-piece stubs are the strongest stub designs available. Each component of a GForce axle is carefully designed, machined, and assembled in-house at the company's factory in Wichita, Kansas. Because they meticulously monitor each procedure, hand-build each axle assembly, and use only the highest quality components.
GFORCE AXLE PRODUCT LINEThe product line of GForce Axles includes renegade axles, outlaw axles, IRS Kit, Driveshaft Adapter front, Driveshaft Adapter rear, ProBushing Complete Kit, ProBushing Cradle Kit, and many more.
GFORCE AXLE PRODUCTS IN VIVID RACINGThe products of GForce Axles included in Vivid Racing are axles, bushings, coil covers, differential components, gussets, braces, handling arms, hubs, miscellaneous suspension parts, ring, pinion, shock accessories, and suspension packages.
GForce Performance Engineering products are designed to be used with OEM products and other GForce products. GForce does not warranty product for fitment with aftermarket products from other manufacturers. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products and other aftermarket products. GForce Performance Engineering products that receive an approved RGA number due to fitment issues with OEM components or GForce products will receive replacement credit or a full refund. GForce products that are returned due to fitment issues with aftermarket product will be subject to a 10% restocking fee.
Purchaser understands and recognizes that racing parts, equipment and services by or manufactured and/or sold by GForce Performance Engineering, are subject to varied conditions due to the manner in which they are to be installed and used. The acceptability and suitability of any part sold or manufactured by GForce Performance Engineering for a particular application is solely the purchaser’s decision. GForce Performance Engineering makes no warranties whatsoever, expressed or implied or written. THERE IS NO WARRANTY OF MERCHANTABILITY. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. Buyer agrees to indemnify and hold Seller harmless from any claim, action or demand arising out of or incident to Buyer’s installation or use of products purchased from GForce Performance Engineering.
