.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear
See more parts for Ford Flex
Select the year of your Ford Flex:
LED Indicators. The factory incandescent turn signals on the Ford Flex illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Flex.
Dual Brightness. The Flex uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15 percent lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between low and high brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses.
Switchback. The dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the low power setting for your running/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors/lenses over the turn signal bulb. If your Flex has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!
Reduced Load. When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Flex looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a hyperblink, or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.
The most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.
You may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Flex, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.
Reliability. Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Flex. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.
Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Ford or anything else, we pride ourselves in offering only the best possible LED solutions.
Features:
Dual Brightness. The Flex uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15 percent lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between low and high brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses.
Switchback. The dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the low power setting for your running/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors/lenses over the turn signal bulb. If your Flex has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!
Reduced Load. When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Flex looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a hyperblink, or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.
The most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.
You may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Flex, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.
Reliability. Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Flex. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.
Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Ford or anything else, we pride ourselves in offering only the best possible LED solutions.
Features:
- 3157 LED Bulb HP11 LED Amber Set of 4
- Modern LED appearance with instant on and off
- Direct replacement for Ford Flex front turn bulbs
- Plug and play, no modification with factory 3157 bulb size
- Multiple brightness levels available
- Quantity: Four (4)
- Warranty: 3 year warranty
- Return Policy: 30-day Return with no restocking fee
- 100 percent Satisfaction Guarantee
- Bulb Size: 3157
- Application: Front Turn Signal
- Make: Ford
- Model: Flex
- Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Flasher
- Setup: BCM Controlled (resistor only)
- Operating Voltage: 9-16V
- Operating Temperature: No
- Connector(s): OEM-Size Plug and Play
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2009-2019 Ford Flex |
Flex | 2009-2019 |
|
2000-2014 GMC Sierra |
Sierra | 2000-2014 |
|
2010-2012 Ram 1500 |
1500 | 2010-2012 |
Diode Dynamics started back in 2006 by Paul McCain. It started as a hobby. And using some parts from Radioshack, he was able to create some LED accent lighting which he sold to some of his friends.
From then on, the company kept on growing to offer more products and employ more people as they progressed. Today, the company is recognized as one of the most reputable LED light manufacturers in the market offering replacement LEDs, Full LED assemblies, multicolor accents and special unique modules.
From Importers to ManufacturersDuring its early days, Diode Dynamics was just rebranding LED lights from overseas, but as they realize, they could create something better. So from then on, they manufacture their own products and have moved into a bigger facility with their design engineer. The company has its own light tunnel to measure beam patterns and various testbeds that ensures that their product is durable to handle whatever weather condition it is subjected to.
Driven by their passion, Diode Dynamics has become the largest specialty application aftermarket lighting manufacturer in the US.
Purchase Diode Dynamics Products at Vivid RacingLED lights have come a long way since it was first introduced in the market. A lot of companies offer LED lights, but only a few can provide top-notch products that do not only perform well but last for a long time. Diode Dynamic is a brand that has all of these, and has been trusted by various enthusiasts for more than a decade. If quality lighting is what you are looking for, then Diode dynamics are for you. Visit Vivid Racing and see the list of their products that would fit your needs.
Satisfaction Guarantee
At Diode Dynamics, we want to ensure every customer is satisfied with their purchase. Therefore, we offer a straightforward satisfaction guarantee: If you aren't satisfied with your purchase, for any reason, just contact us within 30 days of your purchase and we will arrange a refund of your purchase price, or exchange the items with no hassle.
All Products: 3-Year Replacement Limited Warranty
Diode Dynamics carries a 3-year limited warranty on all products, for manufacturing defects or product failure. If you have an issue with any product, we will diagnose the issue with you, and you may be required to answer questions or assist in the diagnosis. If Diode Dynamics determines that your product is defective in material or workmanship, Diode Dynamics will issue an RMA number. An RMA number must be issued before any items are returned.
For approved warranty claims, Diode Dynamics will replace the defective product with the same product or, if it has been discontinued, one comparable in performance and value.
Diode Dynamics product warranty is limited to product replacement only. Diode Dynamics does not offer compensation or coverage of installation labor or time that may be required for replacement of warranty items.
U.S. Customers: All initial shipping costs are covered by Diode Dynamics. In most cases, you will immediately receive the new products with a return label. However, in some cases, you may need to use a provided return label to send back items first. Diode Dynamics will provide one free return label per order. You may return any number of items from the order in one box using the free shipping label. However, you will be responsible for return shipping costs for any other separate returns from the same order.
International Customers: You are responsible for return shipping costs, although Diode Dynamics will cover shipping costs for the replacement. You must return defective products before a replacement can be sent.
Select Products: 8-Year Limited Warranty
In addition to the above 3-Year Replacement Limited Warranty, Diode Dynamics carries an 8-year Limited Warranty on select products. Currently, this includes and is limited to all Stage Series products.
After 3 years of Replacement Limited Warranty, Diode Dynamics will continue to warrant that select products are free of defects for up to 8 years from when the product was ordered. These products must be returned at the customer's expense to Diode Dynamics, for inspection, and will be replaced or repaired, at the sole discretion of Diode Dynamics. Shipping back to the customer will be covered by Diode Dynamics.
Free Support Forever
Diode Dynamics always provides free support and assistance to any customer. If your warranty has expired, you will continue to receive free service, and we will assist you in determining a solution or possible repair to any issues you might be having with our products.
Stipulations
All schedules are based on the number of days between original purchase date and receipt of RMA information by Diode Dynamics. All warranties are non-transferable. Warranty terms and policies are subject to change without notice.
All warranties, expressed or implied, are void if our warranty claim department determines that there is sufficient evidence of one or more of the following:
We understand that some products may be modified in the course of installation or use by the customer to suit a particular need. However, opening, disassembling, cutting wires, or otherwise modifying any product in a manner not specified by Diode Dynamics will void the product warranty.
For modifications to wiring, electrical components, or connectors, our staff will assist as possible, but is trained to support problems that arise in the course of standard use, without modification. Product instructions and installation guidance should be followed as written.
Replacing lenses on lightbars will void the 3-year limited replacement warranty. However, the 8-year limited warranty will be upheld and in effect. In the case of moisture intrusion, you may be required to open and re-seal the lamp yourself. If issues persist, we may require that the lightbar is returned for repair.
At Diode Dynamics, we want to ensure every customer is satisfied with their purchase. Therefore, we offer a straightforward satisfaction guarantee: If you aren't satisfied with your purchase, for any reason, just contact us within 30 days of your purchase and we will arrange a refund of your purchase price, or exchange the items with no hassle.
All Products: 3-Year Replacement Limited Warranty
Diode Dynamics carries a 3-year limited warranty on all products, for manufacturing defects or product failure. If you have an issue with any product, we will diagnose the issue with you, and you may be required to answer questions or assist in the diagnosis. If Diode Dynamics determines that your product is defective in material or workmanship, Diode Dynamics will issue an RMA number. An RMA number must be issued before any items are returned.
For approved warranty claims, Diode Dynamics will replace the defective product with the same product or, if it has been discontinued, one comparable in performance and value.
Diode Dynamics product warranty is limited to product replacement only. Diode Dynamics does not offer compensation or coverage of installation labor or time that may be required for replacement of warranty items.
U.S. Customers: All initial shipping costs are covered by Diode Dynamics. In most cases, you will immediately receive the new products with a return label. However, in some cases, you may need to use a provided return label to send back items first. Diode Dynamics will provide one free return label per order. You may return any number of items from the order in one box using the free shipping label. However, you will be responsible for return shipping costs for any other separate returns from the same order.
International Customers: You are responsible for return shipping costs, although Diode Dynamics will cover shipping costs for the replacement. You must return defective products before a replacement can be sent.
Select Products: 8-Year Limited Warranty
In addition to the above 3-Year Replacement Limited Warranty, Diode Dynamics carries an 8-year Limited Warranty on select products. Currently, this includes and is limited to all Stage Series products.
After 3 years of Replacement Limited Warranty, Diode Dynamics will continue to warrant that select products are free of defects for up to 8 years from when the product was ordered. These products must be returned at the customer's expense to Diode Dynamics, for inspection, and will be replaced or repaired, at the sole discretion of Diode Dynamics. Shipping back to the customer will be covered by Diode Dynamics.
Free Support Forever
Diode Dynamics always provides free support and assistance to any customer. If your warranty has expired, you will continue to receive free service, and we will assist you in determining a solution or possible repair to any issues you might be having with our products.
Stipulations
All schedules are based on the number of days between original purchase date and receipt of RMA information by Diode Dynamics. All warranties are non-transferable. Warranty terms and policies are subject to change without notice.
All warranties, expressed or implied, are void if our warranty claim department determines that there is sufficient evidence of one or more of the following:
- Negligence: Improper installation or improper use, including using or installing any product in a manner not specified by Diode Dynamics, or damage caused by improper installation.
- Abuse: Damage beyond the limits of "normal wear and tear."
- Unauthorized Repair: Repair service performed or attempted by an unauthorized party.
- Unauthorized Dealer: Purchase of items through any unauthorized party.
We understand that some products may be modified in the course of installation or use by the customer to suit a particular need. However, opening, disassembling, cutting wires, or otherwise modifying any product in a manner not specified by Diode Dynamics will void the product warranty.
For modifications to wiring, electrical components, or connectors, our staff will assist as possible, but is trained to support problems that arise in the course of standard use, without modification. Product instructions and installation guidance should be followed as written.
Replacing lenses on lightbars will void the 3-year limited replacement warranty. However, the 8-year limited warranty will be upheld and in effect. In the case of moisture intrusion, you may be required to open and re-seal the lamp yourself. If issues persist, we may require that the lightbar is returned for repair.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.