1-480-966-3040
Mon-Fri 8am to 5pm AZ
Loading...

Easy and inexpensive Plug-N-Play Wiring Harness for DENALI SoundBomb Original & DENALI SoundBomb Split Horns. Does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections.
What's In The Box?
What's In The Box?
- (x1) SoundBomb Horn Wiring Harness
- (x2) Posi-tap inline wire connectors for custom applications
- (x2) Male spade crimp on connectors for custom applications
- (x2) Female spade crimp on connectors for custom applications
- (x4) Wire zip ties
- (x1) 30amp Mini ATM Fuse
- No cutting, soldering or crimping for application with blade style horn connections
- Extra connections for custom applications
- 5.5ft harness length
- 30 amp Mini in-line fuse
- Inline relay socket
- Protective vinyl sheath
- Weather resistant
- For Instructions Installation Guide
- KTM Motorcycle Note: The CAN bus system on most KTM motorcycles does not allow the OEM horn to be removed. Its required that you leave the OEM horn connecteed to prevent failure lights from appearing on the dash.
- BMW Motorcycle Note: All modern BMW motorcycles use a specialty connector at the OEM horn connection. A DENALI Horn Wiring Adapter is necessary for plug-n-play connection with BMW Motorcycles
- Automotive Note: Many modern vehicles use a specialty connector at the OEM horn connection. If your vehicle uses a specialty connector use the included spade connector or posi-tap connectors to make the connection.
- Installation Note: A 5-Pin relay is NOT included with this kit. A relay is provided with the purchase of a DENALI SoundBomb Compact or Split horn.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Check out these other great products

Error: Failed to add product
Please refresh the page and try again.