.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear
See more parts for Ford Ranger
Select the year of your Ford Ranger:
Our 6.0 kit for the 2wd Ford Rangers set the bar years ago as the best performance kit available.
The kit uses our 3" lift fabricated race spindles with a massive 1" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10" of useable wheel travel. The upper arms are made from 1.50" x .120 wall 4130 chromoly tubing and double shears the uniball. With our weld-on dual shock mount we use upgraded FOX 2.0 Performance Series for added control and higher oil capacity which are valved specific for this kit. By adjusting the torsion bars you can setup the front end with 4-6" of lift. Track width is increased 1.5" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit.
What's Included:
The kit uses our 3" lift fabricated race spindles with a massive 1" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10" of useable wheel travel. The upper arms are made from 1.50" x .120 wall 4130 chromoly tubing and double shears the uniball. With our weld-on dual shock mount we use upgraded FOX 2.0 Performance Series for added control and higher oil capacity which are valved specific for this kit. By adjusting the torsion bars you can setup the front end with 4-6" of lift. Track width is increased 1.5" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit.
What's Included:
- Fabricated uniball spindles
- Upper chromoly a-arms
- 10" Limit straps
- Stainless/Kevlar braided extended front brake lines (130007)
- Frame gusset reinforcement kit
- FOX 2.0 IFP Shocks (4) (985-24-004)
- Dual shock mounts (weld-on)
- 4-6" of lift
- 10" of wheel travel
- 1.5" wider per side
- Dual FOX 2.0 shocks
- Lift: 4-6 in
- Wheel Travel: 10 in
- Track Width: +1.5 in per side
- Wheel Size: 15-17 in
- Max Backspacing: 4.75 in
- Tire Size: 31-33 in
- Ford Ranger Edge/Sport 2wd 2001-2012
- Must re-use the factory OEM spindle snouts/pins. Aftermarket versions will not work
- Fiberglass front fenders required to run 33" tires
- Cutting & welding is required to install this kit
- This kit fits 2wd Rangers with torsion bars only. For coil spring trucks use our Ranger XLT 5.5 kits.
- This also fits 2wd 1995-2005 Explorers and 2001-2006 SportTrac's with 11.25" brake rotors.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2001-2012 Ford Ranger |
Ranger | 2001-2012 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.