.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear
See more parts for Ford Ranger
Select the year of your Ford Ranger:
Our 6.0 kit for the 2wd Ford Rangers set the bar years ago as the best performance kit available.
The kit uses our 3" lift fabricated race spindles with a massive 1" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10" of useable wheel travel. The upper arms are made from 1.50" x .120 wall 4130 chromoly tubing and double shears the uniball. With our weld-on dual shock mount we use Bilstein 5100 series for added control and are valved for this kit. By adjusting the torsion bars you can setup the front end with 4-6" of lift. Track width is increased 1.5" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit.
What's Included:
The kit uses our 3" lift fabricated race spindles with a massive 1" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10" of useable wheel travel. The upper arms are made from 1.50" x .120 wall 4130 chromoly tubing and double shears the uniball. With our weld-on dual shock mount we use Bilstein 5100 series for added control and are valved for this kit. By adjusting the torsion bars you can setup the front end with 4-6" of lift. Track width is increased 1.5" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit.
What's Included:
- Fabricated uniball spindles
- Upper chromoly a-arms
- 10" Limit straps
- Stainless/Kevlar braided extended front brake lines (130007)
- Frame gusset reinforcement kit
- Bilstein 5100 Shocks (4) (33-185590)
- Dual shock mounts (weld-on)
- 4-6" of lift
- 10" of wheel travel
- 1.5" wider per side
- Dual Bilstein 5100 shocks
- Lift: 4-6 in
- Wheel Travel: 10 in
- Track Width: +1.5 in per side
- Wheel Size: 15-17 in
- Max Backspacing: 4.75 in
- Tire Size: 31-33 in
- For Instructions Installation Guide
- Ford Ranger Edge/Sport 2wd 2001-2012
- Must re-use the factory OEM spindle snouts/pins. Aftermarket versions will not work
- Fiberglass front fenders required to run 33" tires
- Cutting & welding is required to install this kit
- This kit fits 2wd Rangers with torsion bars only. For coil spring trucks use our Ranger XLT 5.5 kits.
- This also fits 2wd 1995-2005 Explorers and 2001-2006 SportTrac's with 11.25" brake rotors.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2001-2012 Ford Ranger |
Ranger | 2001-2012 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.