.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear
See more parts for Ford Ranger
Select the year of your Ford Ranger:
Take your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.5 Coil-Over shocks from BDS. These kits feature proprietary FOX 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort. This kit includes everything necessary to set your Ford Ranger up right with clearance for up to 33" tires. To ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Up front the lift kit includes steel top mount strut spacers pre-load spacers differential relocation brackets and tubular upper control arms. In the rear this kit includes heavy duty lift shackles and custom-tuned matching FOX shocks. FOX 2.5 coil-overs are available standard with DSC (dual speed compression) adjustment to tune the high-speed and low-speed compression damping allowing for added control on-road with the ability to easily dial in more aggressive damping offroad. Tuning is a simple twist of the two clearly defined knobs with immediate feedback to dial it in for any terrain. Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.
Features:
Features:
- Front Lift Height: 3_5
- Front Lift Method: Coil Over
- Installation Difficulty: moderate
- Installation Time: 4 Hrs
- Installation Tools: 35mm Socket Axle Nut Socket-Air Hammer Rec-ballJointSeparationTool-bit unibit Step Drill Bit-cutOffTool
- Oe Knuckle Type: cast aluminum
- Rear Lift Height: 1
- Rear Lift Method: Shackle
- Rear Shock Option: FOX 2 0 Performance Series
- Shocks Included: Yes
- 3.5 Inch Lift Kit - FOX 2.5 Coil-Over - Ford Ranger (19-23) 4WD
- Aftermarket wheels must have a minimum of 93.1mm center hub bore.
- Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
- Will NOT work on trucks equipped with cast steel steering knuckles
- DSC Adjustment
- HD Upper Control Arms (UCAs)
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2019-2023 Ford Ranger |
Ranger | 2019-2023 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.